Menu
Polyamide semi-products
Supplied semi-products
Available types
| JARID aPA | Basic type, natural colour |
| JARID aPA 03 | 06 | Basic type with 3 % oil, improved slip properties, natural colour |
| JARID aPA 06 | Basic type with 6 % oil, improved slip properties, natural colour |
| JARID aPA C1–C4 | Basic type, C1 = black, C2 = red, C3 = yellow, C4 = blue |
| JARID aPA 03 | 06 C1–C4 | Basic type with 3 % oil, improved slip properties, C1 = black, C2 = red, C3 = yellow, C4 = blue |
| JARID MaPA | Modified aPA type with improved impact strength properties and internal structure |
| JARID ANTISTATIC | Alkaline Polyamide with antistatic properties |
| JARID HaPA | Tough aPA type for elasticity improvement, the material does not chip and does not break |
| JARID aPA MO | Alkaline Polyamide with MoS2 additives for improved slip properties and good tensile strength |
Examples of use:
Semi-product terminology
CAST ROD – A product with a circular cross-section / cylindrical shape created by static casting in a mould at atmospheric pressure.
TENSILE ROD – A product with a circular cross-section of defined length created by polymerization in a mould under pressure.
TUBE – A hollow rod with defined outer and inner diameters and length.
PLATE – A product of a flat rectangular prism shape with defined thickness, width and length.
PRISM – A product of square or rectangular cross-section with defined dimensions.
SHAPE CAST – A product created by casting usually based on drawing documentation and intended for further processing.
MACHINED COMPONENT, SET – A final product for direct use, or including completion (e.g. with bearings, shafts, etc.).
Polyamide – semi-products
Cast weight: max. 200 kg
Colouration: min. 100 kg (black, grey, red, yellow, blue, green)
Modification: min. 100 kg (oil, Desmodur, graphite, Molyka paste, rubber)
Plates: ≠ 8 – 100 mm in dimensions 1000×2000 mm
≠ 110 – 160 mm for dimensions 1000×1000 mm
. Tensile rods: diameter 30 – 100 mm for a length of 1000 mm
Cast rods: diameter 110 – 710 mm for a length of 1000 mm
Tubes: external diameter 60 – 510 mm for a length of 1000 mm
Annulus : external diameter 150 mm – 500 mm for lengths of 200 – 400 mm